A watch is more than just a timepiece — it’s a statement of style, discipline, and personality. Among the many popular watch brands, Tomi Watches have become a favorite for people who appreciate elegant designs at affordable prices. Whether you wear your Tomi Watch daily or only on special occasions, you expect it to be reliable. But what happens when your Tomi Watch suddenly stops ticking?
Before you panic or rush to replace it, there are several reasons why this could happen — and in most cases, the issue is simple to fix. In this detailed guide, we’ll explain why your Tomi Watch may have stopped working and what steps you can take to get it ticking again.
Understanding the Tomi Watch Mechanism
Before diving into troubleshooting, it’s essential to understand how a Tomi Watch works. Most Tomi Watches use a quartz movement, which means they run on battery power. A small quartz crystal inside the watch vibrates at a consistent frequency when powered by the battery, allowing the watch to keep accurate time.
This design makes Tomi Watches both precise and low-maintenance. However, like any battery-powered device, issues can occur due to dead batteries, internal dust, or mechanical wear. Knowing how your watch functions will make it easier to diagnose problems when it stops ticking.
Common Reasons Why a Tomi Watch Stops Ticking
If your Tomi Watch has suddenly stopped working, it doesn’t always mean it’s broken. Several common and easily fixable reasons could be behind the problem:
1. The Battery Has Died
This is the most common reason why a Tomi Watch stops ticking. Quartz watches depend entirely on batteries, and over time, those batteries lose power. Most Tomi Watches have batteries that last between 1 to 2 years, depending on how often you use them and the environment they’re exposed to.
How to Fix It:
Take your watch to a professional watch technician or jeweler and request a battery replacement. Avoid trying to replace it yourself unless you’re familiar with watch mechanisms — improper handling can damage the internal components.
2. The Crown Is Pulled Out
Every Tomi Watch has a small knob on the side called the crown, used to set the time. When the crown is pulled out, the internal gears stop moving so you can adjust the hands. Sometimes, people forget to push it back in fully after setting the time, which makes it appear that the watch has stopped working.
How to Fix It:
Check the crown and gently press it back into place. If the watch starts ticking again, your issue is solved instantly.
3. Moisture or Water Damage
Even though some Tomi Watches are labeled as “water-resistant,” they are not always completely waterproof. If your watch has been exposed to water — like rain, handwashing, or humidity — moisture may have seeped inside. This can cause corrosion or short-circuiting of internal parts.
How to Fix It:
If you suspect water damage, do not open the watch yourself. Take it to a professional watch repair service immediately. They can safely dry and clean the internal mechanism before permanent damage occurs.
4. Dust or Dirt Build-Up
Over time, dirt, lint, and tiny particles can find their way into your watch’s internal system. These contaminants can jam the gears or affect the movement, causing your Tomi Watch to stop ticking.
How to Fix It:
A deep cleaning from a professional watch technician can fix this issue. Regular maintenance — once every year or two — helps prevent dust-related problems in your Tomi Watches.
5. Magnetic Interference
Many people don’t realize that watches can be affected by magnetic fields from electronic devices like phones, speakers, or laptops. Prolonged exposure to magnetic fields can cause your Tomi Watch movement to stop or run inaccurately.
How to Fix It:
Keep your watch away from strong magnets and electronic devices. If you suspect magnetic interference, take it to a service center for demagnetization — a quick and simple process.
6. Mechanical Fault or Internal Damage
Though Tomi Watches are durable, accidents happen. A hard impact, such as dropping your watch, can dislodge internal components or damage the delicate quartz crystal.
How to Fix It:
In such cases, professional repair is the only safe option. A qualified technician can inspect the internal structure and replace any damaged parts.
Step-by-Step Guide to Troubleshoot Your Tomi Watch
Now that you know the potential causes, let’s go step-by-step through what to do when your Tomi Watch isn’t ticking.
Step 1: Check the Crown Position
The first thing you should do is inspect the crown. Make sure it’s pushed all the way in. If it’s not, press it gently until you feel it click. Your watch should start ticking immediately.
Step 2: Test the Battery
If the crown is fine but the watch still isn’t working, the next likely issue is the battery. A dead battery is easy to replace but should always be handled by a professional. Avoid DIY battery changes, as the watch case can be difficult to open without proper tools.
Step 3: Look for Moisture
Check the dial or inside the glass cover for fog or water spots. If you notice any condensation, it’s a sign of moisture inside the watch. Stop wearing it immediately and get it serviced to prevent rust or corrosion.
Step 4: Observe the Second Hand
If your Tomi Watch has a second hand that’s jumping irregularly or stops for a moment before moving again, it could mean the battery is running low. Replace it soon to avoid complete stoppage.
Step 5: Clean the Exterior
Sometimes dust or grime can affect the crown movement or buttons. Gently clean your watch with a soft microfiber cloth. Avoid using water or cleaning sprays directly on the watch.
Step 6: Visit a Professional Service Center
If all else fails, take your watch to a Tomi Watch authorized retailer or a reliable watch repair shop. Professional technicians can open the watch safely, clean it, and replace faulty parts if necessary.
How to Prevent Your Tomi Watch from Stopping Again
While fixing a non-ticking Tomi Watch is usually easy, prevention is always better. Here are a few practical tips to ensure your watch keeps running smoothly for years:
Regular Battery Replacement
Most Tomi Watches use long-lasting batteries, but you should replace them every 1–2 years. Waiting until the battery completely dies can lead to leakage, which can damage the internal circuit.
Avoid Exposure to Extreme Conditions
Keep your Tomi Watch away from extreme temperatures, strong magnets, and high humidity. These elements can weaken the watch’s performance over time.
Store Properly When Not in Use
When you’re not wearing your Tomi Watch, store it in a cool, dry place — ideally in a watch box or pouch. This helps protect it from dust, scratches, and accidental drops.
Clean It Regularly
Wipe your Tomi Watch with a soft, dry cloth after each use to remove sweat, dirt, and oil. Regular cleaning not only keeps your watch looking new but also prevents residue from entering the internal mechanism.
Service It Once a Year
Even budget-friendly watches like Tomi Watches benefit from periodic servicing. Professional maintenance ensures the watch movement remains accurate and extends its lifespan.
Signs It’s Time to Replace Your Tomi Watch
If your Tomi Watch continues to stop even after multiple repairs or battery replacements, it might be time to consider getting a new one. Here are a few signs that indicate replacement is a better option:
The watch loses time frequently, even after servicing.
The case or glass is cracked or severely scratched.
The cost of repairs is higher than the price of a new watch.
The internal mechanism is corroded or beyond repair.
When you decide to upgrade, choose from the latest Tomi Watches collection available in Pakistan. The brand offers an excellent range of new models with enhanced design, durability, and improved movement technology.
Why Choose Tomi Watches
There’s a reason why Tomi Watches are so popular in Pakistan — they offer the perfect blend of style, comfort, and value for money. Whether you prefer a casual leather-strap design or a sleek metal finish, Tomi offers something for everyone.
Some of the key benefits of owning a Tomi Watch include:
Affordable luxury: Stylish designs at budget-friendly prices.
Durable materials: High-quality straps and strong casing.
Accurate timekeeping: Reliable quartz movement.
Versatile designs: Perfect for casual, formal, and professional wear.
So, even if your current watch stops ticking, don’t lose faith — Tomi Watches are designed for longevity and can easily be repaired with the right care.
Conclusion
A Tomi Watch not ticking is frustrating, but it’s not the end of the road. Most of the time, the issue is as simple as a dead battery, a loose crown, or minor moisture inside the case. By understanding how your watch works and following the troubleshooting steps above, you can often get it running again without much hassle.
Always handle your watch carefully, keep it clean, and take it for regular maintenance to ensure long-lasting performance. And if you ever need a replacement, investing in a new Tomi Watch will give you another chance to enjoy the same combination of elegance, quality, and affordability that the brand is known for.
With the right care and attention, your Tomi Watch will keep ticking — both as a symbol of time and timeless style.
